Wednesday, April 1, 2026
14 C
London

Could Jeep reinvent planetary hybrid tech for 4WD adventures?


Stellantis may be looking to adapt planetary gear hybrid systems—like the one currently used in the Chrysler Pacifica Hybrid plug-in hybrid minivan—to more rugged vehicles, a patent filing indicates.

The Pacifica Hybrid uses a planetary power-split system to juggle its 3.6-liter V-6 and a pair of electric motors, which can both be used as generators for propulsion. But in a patent filing submitted to the United States Patent and Trademark Office (USPTO) in July 2023, and published by that office Feb. 6, Stellantis claims such systems are not ideal for all applications.

Stellantis planetary gear transmission patent image

Stellantis planetary gear transmission patent image

Stellantis planetary gear transmission patent image

Stellantis planetary gear transmission patent image

In the filing, Stellantis notes that, when combined with the transfer cases commonly used with mechanical four-wheel-drive systems, a planetary-gear system can cause rough shifts between high and low range, difficulty engaging the low-range gear’s splines while the vehicle is stopped, and difficult synchronizing shifts while in low range.

Problems like these likely contributed to the decision to use a different plug-in hybrid system in the Jeep Wrangler 4xe and Grand Cherokee 4xe plug-in hybrids. Those SUVs retain mechanical four-wheel-drive systems similar to their non-hybrid counterparts, along with 8-speed automatic transmissions. In that setup, one electric motor is integrated with the transmission, while a second, smaller motor-generator attaches to the engine’s crankshaft.

2025 Jeep Grand Cherokee 4xe

2025 Jeep Grand Cherokee 4xe

Stellantis is essentially trying to split the difference by combining with 2-speed transfer case from a traditional four-wheel-drive system with a planetary-gear power split configuration. According to the filing, it aims to do that with a disconnect device that can uncouple the engine and electric motors from the driveline, using motor torque to synchronize the input and output shaft speeds of the transfer case.

Such a system could prove useful in future Jeep hybrid and plug-in hybrid models, helping to maintain their off-road capability while perhaps improving efficiency over the current 4xe system. Those current 4xe plug-in hybrids have generally sold well, and Jeep is reportedly considering hybrids without charge ports to sell alongside them in the U.S.



Source link

Hot this week

Charged EVs | Magna unveils DHD REX single-motor hybrid drive for range-extended EVs

Magna, one of the world’s largest automotive suppliers, has...

Charged EVs | ENNOVI patents adhesive-free lamination for battery cell contacting systems

ENNOVI has secured a German patent for its adhesive-free...

Charged EVs | Inlyte Energy taps Ervin Industries for domestic iron battery supply chain

Inlyte Energy has struck a supply chain agreement with...

Charged EVs | EV charging infrastructure provider VEV emphasizes strategic energy management

The UK government recently announced £1 billion in new...

Charged EVs | ChargePoint introduces new EV charger management solutions

EV charging provider ChargePoint has launched two new offerings...

Topics

Charged EVs | Magna unveils DHD REX single-motor hybrid drive for range-extended EVs

Magna, one of the world’s largest automotive suppliers, has...

Charged EVs | ChargePoint introduces new EV charger management solutions

EV charging provider ChargePoint has launched two new offerings...

Charged EVs | The certified BMS trap: why it might not actually protect your battery

Off-the-shelf controllers with safety certifications are giving e-mobility engineers...

Charged EVs | Kulicke & Soffa’s new ASTERION-TW welds copper terminals without heat for power modules

Kulicke & Soffa has introduced ASTERION-TW, an ultrasonic terminal...
spot_img

Related Articles

Popular Categories

spot_imgspot_img